To configure CDP, first open a terminal on the Cisco device (ssh, telnet or console) then type ‘enable’ and press Enter then the enable or secret password if requested and press Enter and then type ‘config t’ and press Enter …
1. Describe the purpose of a serial interface on a router. A serial interface is typically used to interface to a WAN connection. Serial interfaces are usually configured to support layer 2 technology for the WAN that is typically not …
1. Explain and provide an example of how to define a static route. Explain when static routes would be used. Configure a static route by first logging into user exec or enable mode by typing enable at the CLI then …
Cisco Router Configuration – CLI Static and Dynamic Routing Configuration Basics Read more »
1. What are the differences between Bridges, Routers, and Gateways? Bridges are OSI layer 2 devices where all traffic forwarded through the bridge resides on the same collision domain. Bridges make forwarding decisions based upon the hardware or MAC address …
Difference Between a Router, Switch and a Gateway Read more »