Telnet is used to remotely connect to Cisco devices via IP over a network rather than having to connect to the devices locally using a console cable. To configure telnet on a Cisco device, first plug in a console cable …
How to Configure Telnet on Cisco Routers and Switches Read more »
To configure CDP, first open a terminal on the Cisco device (ssh, telnet or console) then type ‘enable’ and press Enter then the enable or secret password if requested and press Enter and then type ‘config t’ and press Enter …
To backup the Cisco configuration first make sure that you have a running TFTP server available on the network. Once the TFTP server is configured go to the IOS CLI on a terminal program, telnet or SSH then type ping …
1. Explain and provide an example of how to define a static route. Explain when static routes would be used. Configure a static route by first logging into user exec or enable mode by typing enable at the CLI then …
Cisco Router Configuration – CLI Static and Dynamic Routing Configuration Basics Read more »
You are responsible for connecting the network to the Internet using Serial interface 3/3 on corporate 3640 router. The ISP has given you the address 171.69.68.13/30 for the corporate router to attach to the Internet. What do you need to …
Configure a Cisco 3640 Router (or similar) for ISP Connection Read more »
CCNA-Cram-Notes – Detailed exam cram reference in PDF format. Enables a quick search for specific IOS command line topics when you need information right now.